Sintered titanium powder aerator
Sintered titanium powder aerator
porous titanium aerator parts are designed for applications involving extreme
operating conditions and aggressive fluids and gas.the rugged,fixed pore
structure is constructed from sintered titaniun power.the result is an element that
can withstand heat, high pressures and repeated cleaning/backwash cycles.mechanical
strength and corrosion resistance are the results of design with no longitudinal seams.
Features and Benefits:
high corrosion resistance
all sintered titanium construction
backwashable for re-use and maximum economy
multiple end configurations and gasket/o-rings to fit most all vessels.
Specifications:
Media: titanium
End caps: titanium
Gaskets/o-rings options: EPDM,Buna-N,Teflon,encapsulated Viton(O-Rings only)
Micron ratings: 2,5,10,15,35umTube type:
Diameter: Φ 30 mm, 40 mm, 50 mm Φ, Φ Φ 60 mm length: 10 mm to 500 mm
Spherical type:
Diameter: Φ100 mm, 150 mm , Φ 180 mm
Titanium micro aerator with pure titanium powder (purity 99.6899% or higher) as the main raw material, through high temperature and high vacuum sintering. The uniform structure, microporous aperture 0.22-100 microns, the porosity of 35% ~ 50%, the filtration resistance is small, separation and purification of high efficiency, good mechanical performance, tubular, spherical type two kinds, the bottom of the spherical diameter 100 mm to 180 mm, the thickness of 3 mm, aerated bubble 0.1 ~ 2 mm, and aeration resistance small, gas-liquid boundary area is large, bubble spread evenly, won't produce pore blocking, corrosion resistance is strong, energy consumption reduced by 40% than conventional aeration gas, increase the sewage process nearly doubled. Service life up to 10 years. Especially suitable for urban sewage, large-scale water plant expansion and new old aeration tank. Aerator interface means has four points, six points, can be inside or outside thread.
Diameter: Φ 30 mm, 40 mm, 50 mm Φ, Φ Φ 60 mm length: 10 mm to 500 mm
Spherical type:
Diameter: Φ100 mm, 150 mm , Φ 180 mm
Titanium micro aerator with pure titanium powder (purity 99.6899% or higher) as the main raw material, through high temperature and high vacuum sintering. The uniform structure, microporous aperture 0.22-100 microns, the porosity of 35% ~ 50%, the filtration resistance is small, separation and purification of high efficiency, good mechanical performance, tubular, spherical type two kinds, the bottom of the spherical diameter 100 mm to 180 mm, the thickness of 3 mm, aerated bubble 0.1 ~ 2 mm, and aeration resistance small, gas-liquid boundary area is large, bubble spread evenly, won't produce pore blocking, corrosion resistance is strong, energy consumption reduced by 40% than conventional aeration gas, increase the sewage process nearly doubled. Service life up to 10 years. Especially suitable for urban sewage, large-scale water plant expansion and new old aeration tank. Aerator interface means has four points, six points, can be inside or outside thread.
| Filter rating | Filtration precision (µm) | The largest aperture(µm) | Osmosis system 10-12m2 | permeabilitym3/h.m2.kpa | The thickness (mm) | Compressive strengthMpa/cm2 |
| T9 | 0.2 | 2.5 | 1.5 | 3 | 3 | |
| T8 | 0.5 | 4 | 3 | 3 | 3 | |
| T7 | 1 | 6 | 5 | 3 | 3 | |
| T6 | 2 | 10 | 15 | 3 | 3 | |
| T5 | 5 | 15 | 0.04 | 40 | 3 | 2.5 |
| T4 | 10 | 30 | 0.15 | 120 | 3 | 2.5 |
| T3 | 20 | 60 | 1.01 | 250 | 3 | 2.5 |
| T2 | 30 | 100 | 2.01 | 500 | 3 | 2.5 |
| T1 | 50 | 160 | 3.02 | 800 | 3 | 2.5 |
When these metal filters get dirty, they can easily be restored back into service by ultrasonic, backflushing, or other non-abrasive cleaning techniques, which will eliminate the trouble and expense of buying and storing replacement filters elements. Saifilter
回复删除